The Berserker
- Unparalleled Hardware & Cooling Capabilities
- Mammoth Water Cooling Support
- Exclusive Tool-Less Technology
- ARGB Gen2 ready with MasterPlus+ integration
In Spirit Of Cooler Master's Haf Legacy
HAF 700 embodies the spirit of HAF's performance oriented design, boasting attention to mechanical detail.
No Limits
The HAF 700 is capable of housing up to SSI-EEB motherboards (E-ATX), as well as any sized graphics cards in BOTH horizontal and vertical orientations.
Rich Connectivity
The front I/O is designed to maximize the front connectivity for most high end motherboards, featuring four USB Gen 3.1 Type A ports, a USB Gen 3.2 Type-C, a 4 pin audio/mic headset jack as well as a dedicated mic jack.
Unparalleled options for custom cooling
480mm: Side Panel 1
360mm: Front Panel 1 or Bottom Panel 1 / Top Panel 2
240mm: Rear Panel 1
Exclusive SickleFlow fans
HAF 700 comes with dual exclusive 200mm Sickleflow ARGB PWM "Performance Edition" fans tailored to strike a balance between performance potential and noise levels
Unrestricted Front Panel Intake
HAF 700 sports a fully meshed front panel, specifically designed to allow for maximum air intake. With the front panel structurally reinforced to prevent resonation caused by fan vibrations, systems can run smoothly at minimal noise levels.
Integrated 7x PWM & 5x ARGB Hub
This chassis features a fully integrated PWM/ARGB Hub that allows for effortless cable management and control over multiple fans and ARGB devices. The Hub is fully compatible with ARGB Gen2 devices.
Advanced Mounting Options
The unique removable top panel design allows you to effortlessly install, reach and maintain cooling components such as fans and radiators even in builds with complex custom cooling systems. This, coupled with the rotatable radiator/fan bracket included out of the box allows for an unparalleled building experience.
Tool-less Vertical GPU Mounting (Patent Pending)
No more fiddling with screws! HAF 700 features a unique clamping mechanism that allows users to install, remove, and upgrade graphics cards without the need to use any tools.
Tool-less PSU Mount
To install PSUs, simply slide the power supply in place and secure it with the two included thumbscrews on the rear end of the case. No tools, no hassle.
Tool-less HDD Cage
The rear chambers includes a tool-less, swiveling drive cage that allows users to quickly access drives with ease.
Tool-Less Multifunction Brackets
Multifunction, repositionable brackets can be used to mount SSDs, HDDs, or pumps/reservoirs for liquid cooling.
Multi Chamber Layout
HAF 700's structure segregates non heat sensitive components so heat dissipation can be targeted towards heat sensitive components at an overall higher efficiency.
ARGB Gen2 Ready, Controller Included
ARGB Gen2 technology allows users to explore full range customization down to the lighting effecting of each individual LED, while remaining compatible with third party devices.
Description
Specification
-
Form Factor: E-ATX
-
#Hide#Small Form Factor: No
-
Power Supply Wattage: No PSU
-
Motherboard Support: "SSI-EEB, SSI-CEB, E-ATX, ATX, Micro ATX, Mini ITX"
-
#Hide#Window(s): Yes (Window)
-
#Hide#LED Lighting: Yes (LED Lighting)
-
Connectors / Controls: 1 x USB 3.2 Gen2 Type-C
4 x USB 3.2 Gen1 Type-A
1 x 3.5mm 4 Poles Audio Jack
1 x 3.5mm Mic Jack
-
Drive Bays: "2.5"" / 3.5"" Drive Bays (Combo): 9 (4*HDD bracket, 5*Screw+Rubber)"
-
Expansion Slots: 8 Expansion Slots
-
Cooling System: "Included:
Front: 2x 200mm SickleFlow ARGB PWM Fans
Rear: 2x 120mm SickleFlow PWM ARGB Fans
Bottom: 1x 120mm SickleFlow PWM ARGB Fan
ARGB Gen2 Ready Controller
Integrated 7x PWM & 5x ARGB Hub
Fan Mounts:
Top: 2x 200mm, 3x 140mm, 6x 120mm (Remove 480mm bracket)
Front: 2x 200mm
Rear: 2x 120mm
Bottom: 3x 120/140mm
Side: 4x 120mm/3x 140mm"
-
.:
Radiator Options:
Top: Up to 2x 360mm / 1x 420mm
Front: Up to 420 / 360mm
Rear: Up to 240mm
Bottom: Up to 420 / 360mm
Side: Up to 480 / 420 / 360mm
-
Colour: White
-
Material: "Exterior: Steel, Plastic
Left Side Panel: Tempered Glass, Steel, Plastic"
-
Compatibility: "GPU Clearance:
490 mm
CPU Clearance:
166 mm
PSU Clearance :
200 mm
Bottom Mount, ATX"
-
Weight/Dimensions: (LxWxH) 556 x 279 x 540 mm (Body Size)
(LxWxH) 666 x 291 x 626 mm (incl. Protrusions)
-
Additional Features: "Rotatable Radiator Bracket
Removable Top Panel
Multi Chamber Layout
Tool-Less Installation
Dust Filters: Bottom, Right Side"
-
Package Weight: 9.4000 kg
-
Warranty: 2 Years
