{"product_id":"vsp1281x-k","title":"DrayTek VSP1281X-K VigorSwitch P1281x 24 Port Gigabit POE Smart Managed Switch with 4x 10GbE SFP Ports","description":"VigorSwitch P1281x 24 Port GbE 4 Ports 10Gbps SFP+ Switch with PoE\/PoE+\u003cbr\u003eVigorSwitch P1281x is a smart switch with 24 x GbE PoE+ Ports (total of 140W output) and 4 additional independent SFP+ 10Gbps interfaces. Use the SFP+ interfaces for high-speed uplinks between switches, servers and network attached storage devices at up to 10Gbps per port.\u003cbr\u003e\u003cbr\u003eDesigned for centralised management, the VigorSwitch P1281x can be provisioned and monitored with the VigorACS management platform, the free VigorConnect single site management system or, with a DrayTek Vigor router’s Central Switch Management. Easily provision VLAN configuration through the router and clone switch configurations. Drastically reduce the setup time required for a complex network and configure an entire DrayTek network remotely.\u003cbr\u003e\u003cbr\u003e24 RJ-45 Ethernet PoE+ Ports – 10\/100\/1000Mbps\u003cbr\u003e4 x SFP+ 10GbE Ports for Uplink \/ Fibre\u003cbr\u003ePoE (Power-over-Ethernet) for IP phones, wireless access points, IP cameras etc.\u003cbr\u003e140-watt Power-over-Ethernet budget\u003cbr\u003eCloud Managed with VigorACS\u003cbr\u003e1q VLANs with Dynamic MAC-based, Voice \u0026amp; Surveillance VLAN\u003cbr\u003eONVIF IP Camera Surveillance Management with PoE Device Check\u003cbr\u003eAccess Control List (ACL) for port \u0026amp; traffic level security\u003cbr\u003ePort Mirroring \u0026amp; Link Aggregation\u003cbr\u003eIGMP Snooping \u0026amp; Querying\u003cbr\u003eIPv4 and IPv6 Support with IP Conflict Prevention\u003cbr\u003eCentrally managed or standalone operation\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePhysical Interfaces\u003c\/b\u003e\u003cbr\u003e24 RJ-45 Ethernet PoE+ Ports – 10\/100\/1000Mbps\u003cbr\u003e4 SFP+ Ports – 1000Mbps\/10Gbps\u003cbr\u003eFactory Reset Button\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePoE Specification\u003c\/b\u003e\u003cbr\u003e24 Power over Ethernet LAN ports - PoE PSE\u003cbr\u003eIEEE 802.3af PoE \u0026amp; 802.3at PoE+ (High Power) compliant\u003cbr\u003e140 Watts Total Power Budget for PoE\u003cbr\u003eUp to 30 watts per port\u003cbr\u003eAuto Detection of Powered Device (PD) and Consumption Levels\u003cbr\u003ePer Port PoE Status LED Indicators\u003cbr\u003eAlert LED for high PoE Usage\u003cbr\u003ePort Power Consumption Monitoring via Web Interface \u0026amp; CLI\u003cbr\u003eCircuit Protection to Prevent Power Interference between Ports\u003cbr\u003ePoE PD Monitoring \u0026amp; Maintenance Features (per port)\u003cbr\u003e\u0026gt; Scheduling\u003cbr\u003e\u0026gt; PoE PD Priority\u003cbr\u003e\u0026gt; Restart PoE PD if not responding to ping\u003cbr\u003e\u0026gt; Restart PoE IP Camera if not providing camera output\u003cbr\u003e\u003cbr\u003e\u003cb\u003eVLAN\u003c\/b\u003e\u003cbr\u003eUp to 512 VLANs (out of 4096 VLAN IDs)\u003cbr\u003e802.1q Tag-based VLAN\u003cbr\u003ePort-based and MAC-based VLANs\u003cbr\u003eVoice VLAN (OUI Mode)\u003cbr\u003eSurveillance VLAN (OUI Mode)\u003cbr\u003eManagement VLAN\u003cbr\u003e\u003cbr\u003e\u003cb\u003eQoS\u003c\/b\u003e\u003cbr\u003eSupport 8 priority queues\u003cbr\u003ePort-Based rate control (Ingress \u0026amp; Egress)\u003cbr\u003ePriority queue schedule (WRR or Strict Priority)\u003cbr\u003eRate Limit\u003cbr\u003eClass of Service\u003cbr\u003e\u0026gt; 802.1p CoS\u003cbr\u003e\u0026gt; DSCP\u003cbr\u003e\u0026gt; CoS-DSCP\u003cbr\u003e\u0026gt; IP Precedence ToS\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNetwork Security\u003c\/b\u003e\u003cbr\u003eIP Source Guard with ARP inspection\u003cbr\u003eStorm Control (Broadcast, Unknown Multicast, Unknown Unicast)\u003cbr\u003eDoS Attack protection\u003cbr\u003eProtected Port \/ Port Isolation\u003cbr\u003eStatic Port Security\u003cbr\u003eLoop Detection \u0026amp; Prevention\u003cbr\u003eAccess Control Lists (ACL)\u003cbr\u003e\u0026gt; Up to 512 ACL Entries\u003cbr\u003e\u0026gt; Source and destination MAC\u003cbr\u003e\u0026gt; VLAN ID\u003cbr\u003e\u0026gt; IPv4\/v6 address\u003cbr\u003e\u0026gt; Protocol\u003cbr\u003e\u0026gt; TCP\/UDP port\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpanning Tree\u003c\/b\u003e\u003cbr\u003eSpanning Tree Protocol (STP)\u003cbr\u003eRapid Spanning Tree Protocol (RSTP)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLink Aggregation\u003c\/b\u003e\u003cbr\u003eCombine multiple ports to increase bandwidth\u003cbr\u003e8 Aggregation Groups\u003cbr\u003eUp to 8 ports in each group\u003cbr\u003eLACP or Static setup\u003cbr\u003eSupports traffic load balancing\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNetworking Performance\u003c\/b\u003e\u003cbr\u003eSwitching Capacity: 56 Gbps\u003cbr\u003eForwarding Rate: 41.7 Mpps at 64 bytes\u003cbr\u003eMAC Addresses Supported: 8k\u003cbr\u003eJumbo Frames up to 9KB\u003cbr\u003ePacket Buffer size: 4.2Mbit\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMulticast\u003c\/b\u003e\u003cbr\u003eIGMP Snooping V2\/V3 (BISS)\u003cbr\u003eIGMP V2\/V3 Querier\u003cbr\u003e\u003cbr\u003e\u003cb\u003eONVIF Surveillance Management\u003c\/b\u003e\u003cbr\u003eDiscovery of ONVIF-compliant IP Cameras\u003cbr\u003eSurveillance Topology\u003cbr\u003eReal-Time Video Streaming\u003cbr\u003eONVIF Device Maintenance\u003cbr\u003e\u0026gt; Device Information\u003cbr\u003e\u0026gt; Network Settings Configuration\u003cbr\u003e\u0026gt; Time Settings\u003cbr\u003e\u0026gt; Reboot\u003cbr\u003e\u0026gt; Reset to Factory Default Settings\u003cbr\u003e\u0026gt; Ping Check with Mail Alert on disconnection\u003cbr\u003e\u003cbr\u003e\u003cb\u003eManagement\u003c\/b\u003e\u003cbr\u003eWeb User Interface (HTTP or HTTPS)\u003cbr\u003eHTTP (non-TLS) can be disabled for increased security\u003cbr\u003eCommand Line Interface (CLI) via SSH\/Telnet\u003cbr\u003eCentral Management\u003cbr\u003e\u0026gt; VigorACS\u003cbr\u003e\u0026gt; VigorConnect\u003cbr\u003e\u0026gt; Vigor Router Switch Management\u003cbr\u003eFirmware Upgrade\/Backup\u003cbr\u003eConfiguration Backup\/Restore\u003cbr\u003eIPv4 \u0026amp; IPv6 Dual-Stack\u003cbr\u003eFactory Default\u003cbr\u003eSystem Reboot\u003cbr\u003e2-level Admin Privileges\u003cbr\u003eMultiple Admin Accounts\u003cbr\u003eOpenVPN Client with Certificate-based auth\u003cbr\u003eSNMP v1, v2c, v3 (with Generic Traps)\u003cbr\u003eSNTP (Simple Network Time Protocol)\u003cbr\u003eLLDP(802.1ab) + MED\u003cbr\u003eONVIF – IP Camera Management\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDiagnostics\u003c\/b\u003e\u003cbr\u003ePort Status \u0026amp; Usage display\u003cbr\u003eRAM Usage display\u003cbr\u003eMAC Address Table\u003cbr\u003eDevice Check\u003cbr\u003eSyslog\u003cbr\u003eMail Alert\u003cbr\u003e\u0026gt; Port Status\u003cbr\u003e\u0026gt; Port Speed Change\u003cbr\u003e\u0026gt; System Restart\u003cbr\u003e\u0026gt; Device Check\u003cbr\u003e\u0026gt; IP Conflict\u003cbr\u003e\u0026gt; ONVIF IP Camera Snapshot\u003cbr\u003ePort Mirroring\u003cbr\u003ePing Diagnostics\u003cbr\u003ePort-based Cable Test\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIPv4 Features\u003c\/b\u003e\u003cbr\u003eDHCP Client\u003cbr\u003eDNS Client\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIPv6 Features\u003c\/b\u003e\u003cbr\u003eAuto Configuration\u003cbr\u003eStatic IPv6 Address \u0026amp; Prefix Length\u003cbr\u003eStatic IPv6 Default Gateway\u003cbr\u003eIPv6 Neighbour Discovery (ND)\u003cbr\u003eIPv6 Duplicate Address Detection\u003cbr\u003eICMPv6\u003cbr\u003eDHCPv6 Client\u003cbr\u003e\u003cbr\u003e\u003cb\u003eGeneral IEEE Standards Compliance\u003c\/b\u003e\u003cbr\u003e802.3af PoE\u003cbr\u003e802.3at PoE+\u003cbr\u003e802.3 10Base-T\u003cbr\u003e802.3u 100Base-T\u003cbr\u003e802.3ab 1000Base-T\u003cbr\u003e802.3ae 10GBase-T\u003cbr\u003e802.3x Flow Control Capability\u003cbr\u003e802.3 Auto-negotiation\u003cbr\u003e802.3ad Port trunk with LACP\u003cbr\u003e802.3az Energy Efficient Ethernet\u003cbr\u003e802.1q VLAN\u003cbr\u003e802.1p Class of Service\u003cbr\u003e802.1d Spanning Tree (STP)\u003cbr\u003e802.1w Rapid Spanning Tree (RSTP)\u003cbr\u003e802.1ab Link Layer Discovery Protocol (LLDP)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOperating Requirements\u003c\/b\u003e\u003cbr\u003ePower Input Requirements: 100-240VAC\u003cbr\u003ePower supply: Internal\u003cbr\u003eMaximum Input Power Consumption: 200W at 2.5A\u003cbr\u003eCooling: Passively cooled\u003cbr\u003eOperating Temperature: 0 °C to 50 °C\u003cbr\u003eStorage Temperature: -20 °C to 70 °C\u003cbr\u003eOperating Humidity: 10% to 90% (non-condensing)\u003cbr\u003eStorage Humidity: 5% to 90% (non-condensing)\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePhysical Specifications\u003c\/b\u003e\u003cbr\u003eDimensions (W x D x H): 440 x 216 x 44 mm\u003cbr\u003eWeight (excluding SFP modules\/cables): 3.25 kg\u003cbr\u003eRack mountable: 1U\u003cbr\u003e\u0026gt; Brackets included for rack mounting\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003cbr\u003eStandard: Two (2) Year, RTB\u003cbr\u003eSoftware security updates\u003cbr\u003e3 years after the EOL notification. Please note that this only applies to products sold in the UK\u003cbr\u003eOptional VigorCare Enhanced Warranty Available\u003cbr\u003e\u0026gt; VigorCare C3 3 Year Subscription: VCARE-C3\u003cbr\u003e\u0026gt; VigorCare C5 5 Year Subscription: VCARE-C5\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBox Contents\u003c\/b\u003e\u003cbr\u003eVigorSwitch P1281x Network Switch\u003cbr\u003eUK IEC13 Power Cable\u003cbr\u003e1U Rack Mount Fittings\u003cbr\u003eQuick Start Guide\u003cbr\u003e","brand":"DRAYTEK","offers":[{"title":"Default Title","offer_id":52924065546577,"sku":"VSP1281X-K","price":340.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/5637\/2561\/files\/npdra-vsp1281x.jpg?v=1769612061","url":"https:\/\/euroitsolution.com\/products\/vsp1281x-k","provider":"Euro IT Solution Ltd.","version":"1.0","type":"link"}